GO Audio ESP-1 Executive Bluetooth Speaker

Custom-crafted with real maple and walnut wood panels, this stylish speaker will satisfy all of your personal sound amplification needs.  Two loud speaker drivers and volume control on front face.  Custom laser engraving is available.

ESP-1 Executive Bluetooth Speaker

ESP-1 Executive Bluetooth Speaker

Bluetooth Amplifier 30W per channel into 4Ω
Nominal Impedance No connection possible
Headset Power 105mW X2
Dimensions 15″ X 6″ X 5″

GO Audio ESP-2 Executive Bluetooth Speaker

Custom-crafted with real maple and walnut wood panels, this stylish speaker will satisfy all of your personal sound amplification needs.  Four loud speakers on front face – volume control on rear.  Customer Laser Engraving available.

esp-2-from-catalog

ESP-2 Executive Bluetooth Speaker

 
BLUETOOTH AMPLIFIER 30W per channel into 4Ω FREQUENCY RESPONSE 150Hz to 20Hz
NOMINAL IMPEDANCE no connection possible CROSSOVER FREQUENCY 6dB per octave at 500Hz
HEADSET POWER 105mW X 2 POWER HANDLING 20W per channel pink noise
DIMENSIONS 15″ X 6″ X 5″

 

GO Audio SA-6 Slim Profile Line Array Loud Speaker

SA-6 Custom - Teak

SA-6 Custom – Teak

Line-array technology and unique design are combined into a full range high-dynamic range and ultra-low distortion loudspeaker system capable SLIM PROFILE of high-fidelity sound even in challenging spaces. Custom sizes available.

Each SA-6 is made up of six 3-in full-range transducers with a total width of 10.5-in and 3-ft tall.

At less than 6-in deep it can be mounted anywhere convenient to a wall with a standard 200mm (40 lb. rated) VESA mount.

Each SA-6 is coated with an ultra-hard sprayed-on finish that resists wear.

Available in white or black.

SA-6 Line Array

SA-6 Line Array

SA-6 Line Array Loudspeaker

DRIVER COMPLIMENT
6 x 3-in full range driver with aluminum convex cone
FREQUENCY RESPONSE
150Hz to 16.5KHz +/-3dB (with recommended EQ)
NOMINAL COVERAGE
40° vertical by 120° horizontal
POWER HANDLING
90W continuous RMS, 180W program
SENSITIVITY
(1W @ 1 Meter) = 89 dB
MAX SPL
108 dB at 90W
NOMINAL IMPEDANCE
13Ω Recommended crossover at 150Hz
MOUNTING
200mm VESA mounting holes on reverse (Use standard VESA mount rated at least 80 lbs.)
DIMENSIONS
36-in x 10.5-in x 5.7-in
WEIGHT
Approximately 60 lbs.

GO Audio SA-12 Slim Profile Line Array Loud Speaker

Line-array technology and unique design are combined into a full range high-dynamic range and ultra-low distortion loudspeaker system capable SLIM PROFILE of high-fidelity sound even in challenging spaces. Custom sizes available.

Each SA-12 is made up of twelve 3-in full-range transducers with a total width of 10.5-in and 6-ft tall.

At less than 6-in deep it can be mounted anywhere convenient to a wall with a standard 200mm (80 lb. rated) VESA mount.

Each SA-12 is coated with an ultra-hard sprayed-on finish that resists wear.

Available in white or black.

SA-12-black

SA-12-Black

SA-12 Line Array Loudspeaker

DRIVER COMPLIMENT
12 x 3-in full range driver with aluminum convex cone
FREQUENCY RESPONSE
100Hz to 16.5KHz +/-3dB (with recommended EQ)
NOMINAL COVERAGE
30-deg vertical by 120-deg horizontal
POWER HANDLING
180W continuous RMS, 360W program
SENSITIVITY
(1W @ 1 Meter) = 92 dB

MAX SPL

114 dB at 180W
NOMINAL IMPEDANCE
6.5Ω Recommended crossover at 100Hz
MOUNTING
200mm VESA mounting holes on reverse (Use standard VESA mount rated at least 80 lbs.)
DIMENSIONS
72-in x 10.5-in x 5.7-in
WEIGHT
Approximately 60 lbs.

 

GO Audio SB-3 Passive-Radiator Sub-Woofer

Passive-radiator technology & unique design are combined into a high-dynamic range & low distortion sub-woofer system that matches the styling of our full-range models. It also hides easily in classrooms and other small spaces.

SB-3 Passive-Radiator Sub-Woofer

SB-3 Passive-Radiator Sub-Woofer

A Sub-woofer For Churches, Large Classrooms And Small Auditoriums

Use these sub-woofers in multiples to handle larger spaces (with no EQ) and live performances.

Ideal for Music Playback

With the addition of these sub-woofers, the GO Audio SA-12 and SA-6 become a full-range solution. Speech, music, soundtracks, & sound effects will all be faithfully reproduced.

Clean Styling

Each SB-3 is made up of three 8″ transducers, with a total width of 10.5″ and 3′ tall.  At only 9.5″ deep it can be mounted conveniently to any wall with a standard 200 mm (40 lb. rated) VESA mount.

Rugged Finish

Each SB-3 is coated with an ultra-hard sprayed-on finish that resists wear. Available in white or black.

Driver Compliment
One 8″ active sub-woofer driver and two 8″ passive  radiators
Frequency Response
42 Hz to 875 Hz +/- 3 dB (with no EQ)
Power Handling
80 W continuous RMS, 160 W program (both coils driven)
Sensitivity
(1 W @ 1 Meter) = 86 dB
MAX SPL
105 dB at 80 W
Nominal Impedance
2 x 8Ω, Recommended crossover at 100 Hz to 150 Hz
Mounting
200 mm VESA mounting holes on reverse (Use standard VESA wall mount rated at least 40 lbs.)
Dimensions
 36″ x 10.5″ x 9.5″
 Weight
Approximately 40 lbs.