GO Audio SA-6 Slim Profile Line Array Loud Speaker

SA-6 Custom - Teak

SA-6 Custom – Teak

Line-array technology and unique design are combined into a full range high-dynamic range and ultra-low distortion loudspeaker system capable SLIM PROFILE of high-fidelity sound even in challenging spaces. Custom sizes available.

Each SA-6 is made up of six 3-in full-range transducers with a total width of 10.5-in and 3-ft tall.

At less than 6-in deep it can be mounted anywhere convenient to a wall with a standard 200mm (40 lb. rated) VESA mount.

Each SA-6 is coated with an ultra-hard sprayed-on finish that resists wear.

Available in white or black.

SA-6 Line Array

SA-6 Line Array

SA-6 Line Array Loudspeaker

DRIVER COMPLIMENT
6 x 3-in full range driver with aluminum convex cone
FREQUENCY RESPONSE
150Hz to 16.5KHz +/-3dB (with recommended EQ)
NOMINAL COVERAGE
40° vertical by 120° horizontal
POWER HANDLING
90W continuous RMS, 180W program
SENSITIVITY
(1W @ 1 Meter) = 89 dB
MAX SPL
108 dB at 90W
NOMINAL IMPEDANCE
13Ω Recommended crossover at 150Hz
MOUNTING
200mm VESA mounting holes on reverse (Use standard VESA mount rated at least 80 lbs.)
DIMENSIONS
36-in x 10.5-in x 5.7-in
WEIGHT
Approximately 60 lbs.

GO Audio SA-12 Slim Profile Line Array Loud Speaker

Line-array technology and unique design are combined into a full range high-dynamic range and ultra-low distortion loudspeaker system capable SLIM PROFILE of high-fidelity sound even in challenging spaces. Custom sizes available.

Each SA-12 is made up of twelve 3-in full-range transducers with a total width of 10.5-in and 6-ft tall.

At less than 6-in deep it can be mounted anywhere convenient to a wall with a standard 200mm (80 lb. rated) VESA mount.

Each SA-12 is coated with an ultra-hard sprayed-on finish that resists wear.

Available in white or black.

SA-12-black

SA-12-Black

SA-12 Line Array Loudspeaker

DRIVER COMPLIMENT
12 x 3-in full range driver with aluminum convex cone
FREQUENCY RESPONSE
100Hz to 16.5KHz +/-3dB (with recommended EQ)
NOMINAL COVERAGE
30-deg vertical by 120-deg horizontal
POWER HANDLING
180W continuous RMS, 360W program
SENSITIVITY
(1W @ 1 Meter) = 92 dB

MAX SPL

114 dB at 180W
NOMINAL IMPEDANCE
6.5Ω Recommended crossover at 100Hz
MOUNTING
200mm VESA mounting holes on reverse (Use standard VESA mount rated at least 80 lbs.)
DIMENSIONS
72-in x 10.5-in x 5.7-in
WEIGHT
Approximately 60 lbs.